Gabriel Hemery
author · photographer · silvologist
Home Knowledge Books Photography News Shop
gabrielhemery.comNews › Fine guns and walnut

Fine guns and walnut

Some years ago I had the privilege of visiting a leading maker of fine guns, James Purdey and Sons of London (Est. 1814), where I met their wood expert and buyer.

The common or English walnut (Juglans regia) is the wood of choice for gunmaking as it has superior strength and flexibility, and it holds tightly the surprisingly small screws that are used to mount the metal parts to the stock.  The other quality in walnut is its beautiful figure of course.  One gunmaker’s lyrical explanation of walnut figure captures it perfectly:

“mottles and motes, sunburst and fiddleback: as intricate as an opium dream.”

I was shown into Purdeys’ stockroom, an Aladdin’s cave containing thousands of beautiful wood ‘blanks‘; ready for the next customer to select their choice of wooden gunstock.  The company go to enormous effort to source walnut of the right quality, with the emphasis on both beauty and strength.  Today they source almost exclusively from the walnut forests of Turkey.  Other sources have been used in the past but these have been either exhausted of suitable stock or proven to be too expensive due to access problems. Kyrgyzstan is a good example of the latter, where the mountainous terrain and poor infrastructure are significant barriers.

In the stockroom my eyes were drawn to one particular wooden blank that had been shaped and part-machined but lay amongst the thousands of other rectangular blanks on a shelf.  It had beautiful figure and I wondered, aloud, why it has not been finished and used in a gun.  The expert pointed out that though the figure was exquisite, the grain at the gun’s thinnest and most vulnerable point, the neck, ran across rather than along the blank.  He explained that it had been shaped and machined to that point only because the customer was so keen of this particular piece of walnut.  However, it could never be used as a blank as it would have been dangerously weak.  He then surprised me saying “you can have it if you like?”

walnut gunstock
The half-complete walnut gunstock donated to me by James Purdeys & Sons. Notice the lathe mount on the butt and the machining undertaken for the gun parts.

I was obviously delighted and have used it for years in talks and presentations.  I polished one side of the blank to bring out the beautiful figure.  Had this blank been perfect it would have been worth at least £10,000; if part of a matching pair over £25,000 for the two.  This sort of value is rare in wood but of course Purdeys supply the highest end of the market where only the best will do.

Gabriel Hemery

← Back to News